河北师范大学学报—

期刊信息

刊名：河北师范大学学报（自然科学版）Journal of Hebei Normal University (Natural Science)
主办：河北师范大学
ISSN： 1000-5854
CN： 13-1061/N
中国科技核心期刊
中国期刊方阵入选期刊
中国高校优秀科技期刊
华北优秀期刊
河北省优秀科技期刊

协同采编系统

友情链接

强流脉冲电子束轰击对DZ22镍基高温合金表面形貌及硬度的影响

中国民航大学天津市民用航空器适航与维修重点实验室, 天津 300300
DOI： 10.13763/j.cnki.jhebnu.nse.2018.03.006

Effect of High Current Pulsed Electron Beam Bombardment on Surface Morphology and Hardness of DZ22 Nickel Based Superalloy

ZOU Hui, ZHANG Keju

PDF
下载
HTML

摘要/Abstract

摘要：

DZ22镍基定向凝固高温合金在高温环境中具有优良的高温稳定性，被广泛应用于高温热端工件.利用强流脉冲电子束（HCPEB）对DZ22合金进行轰击处理，提高其表面性能.对轰击后表面形貌及硬度研究发现，HCPEB轰击DZ22合金后，合金表面由于易熔物烧蚀、喷发而形成熔坑，并且易熔物所处位置对HCPEB轰击后所形成的熔坑形貌造成影响.轰击次数的不同影响DZ22合金表面强化相出现的位置以及形貌.轰击后在合金表面形成~4μm厚度的重熔层以及~30μm厚度的热影响区.不同的轰击次数对合金表面硬度的影响不同，轰击1，10次的合金表面硬度明显高于轰击5，20次.

Abstract：

DZ22 Ni-based directional solidification superalloy,due to its excellent property in high temperature environment,is widely used in high temperature hot end workpieces.High intensity pulsed electron beam (HCPEB) was used to bombard the DZ22 alloy to improve its surface properties.The morphology and hardness of the surface after bombardment were studied.The results indicate that the surface of the bombarded alloy was eroded into craters due to the fusible material.The location of the fusibles affected the morphology of the crater formed by the HCPEB bombardment.The number of bombardment will affect the location and of the strengthened phase on the surface of the DZ22 alloy.After bombardment,a remelted layer with a thickness of about 4μm and a heat-affected zone with a thickness of about 30μm were formed on the alloy surface.The effect of different numbers of bombardment on the surface hardness of the alloy was different.The surface hardness of the alloy the 1 shot and 10 shots was obviously higher than that of the alloy with 5 shots and 20 shots.

关键词

关键词： 强流脉冲电子束 ; DZ22镍基高温合金 ; 表面形貌 ; 截面形貌 ; 显微硬度

Key words： high current pulsed electron beam ; DZ22 nickel based superalloy ; surface morphology ; sectional morphology ; microhardness

参考文献 15

[1] 邹慧.DD3单晶高温合金强流脉冲电子束表面改性研究[D].天津:天津大学,2011.
[2] 孙文飞,梅显秀,李晓娜,等.强流脉冲离子束辐照对DZ4合金性能的影响[J].强激光与离子束,2006,18(12):2082-2086.
[3] 陈荣章,王罗宝,王玉屏.高强度定向凝固高温合金DZ22研究和应用[J].航空材料学报,1991,11(1):1-11.
[4] ZOU J X,ZHANG K M,HAO S Z,et al.Mechanisms of Hardening Wear and Corrosion Improvement of 316L Stainless Steel by Low Energy High Current Pulsed Electron Beam Surface Treatment[J].Thin Solid Films,2010,519:1404-1415.doi:10.1016/j.tsf.2010.09.022
[5] 关庆丰.强流脉冲电子束作用下金属材料的微观结构状态[D].长春:吉林大学,2005.
[6] XU Y,ZHANG Y,HAO S Z,et al.Surface Microstructure and Mechanical Property of WC-6% Co Hard Alloy Irradiated by High Current Pulsed Electron Beam[J].Applied Surface Science,2013,279(8):137-141.doi:10.1016/j.apsusc.2013.04.053
[7] 邹建新.强流脉冲电子束材料表面改性基础研究:在金属及金属间化合物上的应用[D].大连:大连理工大学,2007.
[8] ZOU J X,ZHANG K M,GROSDIDIER T,et al.Orientation-dependent Deformation on 316L Stainless Steel Induced by High-current Pulsed Electron Beam Irradiation[J].Materials Science and Engineering A,2008,483/484:302-305.doi:10.1016/j.msea.2006.07.179
[9] 李旻才.强流脉冲电子束AZ91镁合金表面改性组织及性能研究[D].大连:大连理工大学,2016.
[10] 吴平生.强流脉冲电子束处理模具钢SKD11的形貌和性能研究[D].大连:大连理工大学,2008.
[11] 高波.纯镁及镁合金强流脉冲电子束表面改性[D].大连:大连理工大学,2005.
[12] 张向东.强流脉冲电子束钦基和镍基合金表面改性[D].大连:大连理工大学,2011.
[13] 田小梅.ZK60镁合金强流脉冲电子束表面改性及复合表面处理研究[D].沈阳:东北大学,2008.
[14] ZHU X P,LEI M K,DONG Z H,et al.Crater Formation on the Surface of Titanium Irradiated by a High-intensity Pulsed Ion Beam[J].Surface & Coatings Technology,2003,173(1):105-110.doi:10.1016/S0257-8972(03)00321-9
[15] 柏广海,胡锐,李金山,等.Ni-Cr-W基高温合金二次M₂₃C₆析出行为[J].稀有金属材料与工程,2011,40(10):1737-1741.